Tubes in tattooing – Tattoo Supplies

To encase the needle bars two types of machines are used number one is the shader tube and the second is a linear tube, which is called machined tubes. These are used for easier handling control. Each tube is specifically designed with every needle bar it is used to be with that needle bar. For example, a five-needle shader is used with a five-needle shader tube. Just there is an exception with the three-needle square tip linear tube. It is to be noted that suppliers make their needle bars to fit their own tubes. So these are very important terms while buying the tattoo supplies from the supplier. So be conscious to buy your needle bars machines and tubes from the same supplier to keep things correct and fitting together right.

Linear Tubes which are machined

Linear tubes have two types of Tattoo Supplies. One type is with a round tip and the other type is with a square tip. So selecting one from both is your personal preference but each type has the advantage over the other type. We will discuss the round tip tube first and will check its work. When you will use a rubber band you will not face any problems with the ink splatter after the correct adjustments to care for it. When you are to make a sharp corner while tattooing the body the needles could move over it so it will cause a wider line. For example, if you have the number of needles hanging out at the end of the tip, it will help you to hang up in the skin. To sort out this problem move the tube down. For assembling the tubes proper tattoo supplies are used.

Now the second type of tube is a square tip tube. Square tip tube is the professional tube. With the help of these types of tubes, the needles will never move no matter how quickly you are moving and how sharp you go around a corner. The lines will not change it’s with the lines will always stay with the same width. So everything is in perfect alignment and works properly.

Setting the tubes in Tattooing

This process is very used initially and it is an important process. And it requires some careful study. In this process, the needles are put into the needle bars in the tube and after placing the needles the tubes and machines are adjusted for proper tattooing. Do not show careless behavior in this process because if you will not give attention to what you are doing the tips of the needles will get damaged. Every time the tubes and needles must be sterilized and the machine after use is put back together. Tattoo supplies play an important role in the setting t of tubes in a professional way.

The first works in the morning is that, sterilized the tubes and needles after sterilization assembles the needles and tubes, and wrap them with the clean tissue until used later in the day. So after placing every tattoo some steps are must be done for your professional work.

•             Sterilization of the tattoo supplies

•             Assembling the tubes after placing the tattoo

•             Assembling the needles after placing the tattoo

•             Assembling the machines after placing the tattoo

In this modern age along with the use of modern tattoo supplies the customer also checks that the procedure is done correctly or not. When new machines are bought from the buyer everything arrived with the proper set-up but needles and tubes are not sterilized. They still need to be sterilized and after sterilization, these are used.

Take hold of new tattoo supplies. You have to study different things like the coils going to right and tubes going to left now for this you must be able to check these things at the same time.